Audio Out; Volume Increase Amount; Av Sync. Adjust; Digital Audio Input - LG 32SE3D Owner's Manual

32

Audio Out

Sound
• Off: Disables the use of Audio Out. (No audio outputted.)
• Variable: You can specify an output range for the external audio device connected to the monitor and adjust the
volume within the range. You can change the volume of an external audio device within the range of 0 to
100 (the same as the Signage speaker volume). However, there may be a difference in the actual volume
level outputted.
• Fixed: Set a fixed audio output level for the external audio device.
- If there is no external input, no external audio is outputted.
- The variable audio output level 100 is the same as the fixed audio output level.

Volume Increase Amount

Sound
This feature enables you to adjust the amount of volume that increases/decreases when you press the up/down volume
key on your remote control. The higher the value you set, the faster the volume increases. Choose from among Low,
Medium, and High to adjust the volume range.

AV Sync. Adjust

Sound
This feature adjusts audio timing to synchronize video and audio.
• External Speaker (-5~15): Adjust the sync between video and audio coming from external speakers, such as those
• Internal Speaker (-5~15): Adjust the sync of sound from the internal speakers. Moving closer to – speeds up the
• Bypass: Output the broadcast signals or the sound from external devices without any audio delay. Audio may be
outputted earlier than video due to the processing time for video that is inputted into the monitor.

Digital Audio Input

Sound
This feature enables you to choose an input source for audio output.
Digital: Output the audio contained in the digital signal inputted from the connected digital input source (HDMI,
•
DISPLAYPORT, or OPS).
• Analog: Output audio from the digital input source (HDMI, DISPLAYPORT, or OPS) connected to the monitor through
the Audio In port.
Audio Out
Volume Increase Amount
AV Sync. Adjust
connected to the digital audio output port, LG audio equipment, or headphones. Moving
closer to – speeds up the audio output, while moving closer to + slows down the audio
output, compared to the default value.
audio output, while moving closer to + slows down the audio output, compared to the
default value.
Digital Audio Input