LG 32SE3D Owner's Manual page 84

44
Setting Data Cloning
1
Select your desired group and click Clone.
2
Check that the data have been copied on the slave sets.
Content Distribution
1
Select the type of content you wish to distribute (Schedules or Playlists).
2
Select the content you wish to distribute.
3
Select the group to which you wish to distribute the content and click Distribute.
4
Run the Content Manager app on the slave sets and check that the content has been distributed.
How to Use
• Monitors: Run/add/delete/edit apps in the Launcher bar.
• Mobile devices: Run the app in the Launcher bar or access the app from a mobile device using the QR code or URL
provided.
CAUTION
• You can create up to 25 groups.
• You can add up to 12 slave devices to a group.
• You can distribute the schedules stored on external devices after executing Content Manager's import operation.
• Make sure to delete all schedules stored on the slave sets before distributing any schedules.
• A list of devices you can add to your desired group appears only when the following conditions have been met:
- The devices you wish to add must be on the same network as the master device.
- The devices you wish to add must be in Master mode, and they must not belong to any existing group.
- The UPnP feature must be enabled (go to General -> Network -> UPnP and set it to On).
• Group Manager 2.0 may not work properly in wireless network environments. It is recommended you use a wired
network.
• Run the initial settings for Slave function when deleting the group.