LG 32SE3D Owner's Manual page 52

12
PM Mode
• Power Off(Default): Sets the normal DC off mode.
Sustain Aspect Ratio: Identical to normal DC off mode except that the Switching IC remains on. On some models,
•
this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off
Always in other input modes.
• Screen Off: Switches to Screen Off status when entering DPM, Auto Power Off (15 mins, 4 hours), or Abnormal
Shut Down mode.
• Screen Off Always: Switches to Screen Off status when entering DPM, Auto Power Off (15 mins, 4 hours), Off
Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's
Power button or the monitor's Off button.
• Screen Off & Backlight On: Partially turns on the backlight to keep the display at a proper temperature when in
NOTE
In order for the screen to switch from Screen Off to On status, there must be input from the remote control's Power
•
or Input button, or the monitor's On button.
Power On Delay (0~250)
• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
• You can set the delay interval in the range of 0 to 250 seconds.
Power On Status
• Select the operating status of the monitor when the main power has turned on.
You can choose from among PWR (Power On), STD (Standby), and LST (Last Status).
•
PWR (Power On) keep the monitor powered on when the main power has turned on.
•
• STD (Standby) switch the monitor to Standby status when the main power has turned on.
• LST (Last Status) switches the monitor back to its previous status.
Wake On LAN
• Set whether to use Wake On LAN.
• You can set the feature to On or Off for each wired/wireless network.
• Wired: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely through a
wired network.
• WiFi: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely through a
wireless network.
Screen Off status.