Overlaying Projection - Toshiba TLP780U Owner's Manual

Overlaying projection

You can draw figures or letters with a pen on the
picture of RGB input or video input, by using the
overlaying function.
Remote control
2
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET
L-CLICK R-CLICK
VOLUME/ADJUST
Camera control panel
MENU ENTER EXIT
PIP FREEZE
W.BALANCE
LOCK
RESIZE
CALL MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
2
Preparation
1
Project a picture on the screen as explained in the step "Picture projection with the
document imaging camera".
Prepare white paper and a red or blue pen.
2
1
2
OVERLAY ARM LIGHT
3
CAMERA CAMERA
GAIN
3
4
Notes
• Handwriting in colors except blue and red cannot be displayed properly.
• Handwriting in fine lines may not be displayed properly.
• The depth overwritten can be adjusted from the menu screen.
56
Set the white paper on a flat place
and set the camera so that paper is
projected to the full screen.
The white paper should be projected fully on the
screen.
INPUT
Select the input source using the overlay
function by pressing INPUT.
INPUT
Select the input source other than the camera input.
OVERLAY
Press OVERLAY
Draw any line on the paper with a red
RGB picture or blue pen.
Screen
A drawn line is projected on the screen, overlapped
with the picture of the input source.
The position of a pen point can be confirmed on the
Paper
screen before drawing anything.
59
CONTENTS
46