User Channels; Registering User Channels - Furuno FS-1570 Operator's Manual

2 SSB RADIOTELEPHONE

2.6 User Channels

The USER CH menu allows registration of user TX and RX channels, where permitted by
the Authorities.

2.6.1 Registering user channels

"USER CH" in the System setup menu must be enabled in order to register user channels.
For further details, contact your dealer.
1. At the radiotelephone screen, press the [#/SETUP] key.
Setup menu
****
NB
SQ FREQ
FAX RX ENABLE
USER CH
SYSTEM
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. ENTRY is selected; push the [ENTER] knob.
User ch entry
***
!
MODE: SSB
00201. TX: 2111.5
00202. TX: 2222.0
00203. TX: 2333.5
00204. TX: 2444.0
00205. TX: 2555.5
# $
UP DOWN
4. Push the [ENTER] knob to open the user channel options window.
User ch entry
***
!
MODE: SSB
00201. TX: 2111.5
00202. TX: 2222.0
MODE
00203. TX: 2333.5
CH
00204. TX: 2444.0
FREQ
00205. TX: 2555.5
# $
UP DOWN
5. Rotate the [ENTER] knob to choose MODE and then push the [ENTER] knob.
2-10
NOTICE
FURUNO will assume no responsibility
for the disturbance caused by the
unlawful or improper setting of user
channels.
****
: OFF
: 600 HZ
: OFF
**
"
CH: 2-01
RX: 2111.5
RX: 2222.0
RX: 2333.5
RX: 2444.0
RX: 2555.5
**
"
CH: 2-01
RX: 2111.5
RX: 2222.0
RX: 2333.5
RX: 2444.0
RX: 2555.5