Diagnostics - Furuno FS-1570 Operator's Manual

12 MAINTENANCE & TROUBLESHOOTING

12.8.4 Diagnostics

General diagnostics
1. Press the function key [F6] to display the System menu.
Setup
Slave Delay
BK Timing PreTone
Mute Timing PreBK
Modem Output Level
MIF Tune
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode
Self Test
2. Choose Change from Setup.
3. Choose Self Test (at the bottom of the screen).
4. Press the [Enter] key. The results of the self test are displayed a short time later.
Terminal Unit Test : ver. 1.20
Main Unit Test
Modem Unit Test
Radio Unit Test
DSC Unit Test
Printer Unit Test*2: Printer not Ready :NG
*1: Actual ID numbers appears.
*2: OK replaces NG when printer is turned on and normal.
If NG appears for any unit checked, try the self test again. If it appears again, call for
service.
12-10
System
PostTone
PostBK
Freeze
AGC
Emission
System menu
Self Test
: ver. 1.17
: ver. 1.18
: ID xxxx*1
: ID xxxx*1
Self test results
Lock Change Default
5 msec (0- 50 msec)
10 msec (0-100 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 dBm (-30 - +10 dBm)
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF UTC SMT JST
2002/1/1/12:34:56
Normal Reverse
:OK
:OK
:OK
:OK
:OK