Preparing Group Calls - Furuno FS-1570 Operator's Manual

6 PREPARING TX CALLS

6.2 Preparing Group Calls

1. At the DSC standby screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose MESSAGE and then push the [ENTER] knob.
3. Push the [ENTER] knob to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Rotate the [ENTER] knob choose GROUP CALL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the GROUP ID entry window.
Message file entry
*
CALL TYPE: GROUP CALL
GROUP ID : 0 --------
000000000
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
6. Key in ID of group with the numeric keys and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
Message file entry
*
CALL TYPE: GROUP CALL
GROUP ID : 012345678
COM. TYPE : TELEPHONE
TELEPHONE
COM. FREQ : NO INFO
NBDP-FEC
DSC FREQ : 2M-INTL
8. Rotate the [ENTER] knob to choose appropriate communications type and then push
the [ENTER] knob.
9. Push the [ENTER] knob to open the COM. FREQ menu.
Message file entry
*
CALL TYPE: GROUP CALL
GROUP ID : 012345678
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
10.Rotate the [ENTER] knob to choose appropriate item and then push the [ENTER] knob.
(See page 5-6 for details for how to enter frequency and channel.)
11. Push the [ENTER] knob to open the DSC FREQ menu.
6-4
FREQUENCY
CHANNEL