Furuno FS-1570 Operator's Manual page 76

5 CALLING, RECEIVING
Manually acknowledging individual call with "UNABLE"
1. When an individual call is received, the alarm sounds and the display shows the
message "Individual request call received."
Individual request
call received.
FROM SHIP:
ROUTINE
TELEPHONE
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
Received message
*
MAR-23-2002-23:00:00
INDIVIDUAL REQUEST
FROM SHIP:
ROUTINE
TELEPHONE
! "
ANSWER
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob.
4. Push the [ENTER] knob to open the CALL TYPE menu.
Compose message
**
CALL TYPE : ABLE
ACKNOWLEDGEMENT
ABLE
TO SHIP :
001234567
COM. TYPE : TELEPHONE
UNABLE
COM. FREQ : CH12034
DSC FREQ: 1
2577.5 KHZ
GO TO ALL VIEW
5. Rotate the [ENTER] knob to choose UNABLE and then push the [ENTER] knob.
6. Push the [ENTER] knob. The display then prompts you to choose the reason you are
unable to acknowledge the call.
Compose message
**
CALL TYPE : UNABLE
NO REASON
ACKNOWLEDGEMENT
REASON BUSY : NO REASON
GIVEN
EQUIP DISABLED
TO SHIP :
001234567
MODE NOT USABLE
DSC FREQ :
12,577.5 KHZ
CH NOT USABLE
7. Rotate the [ENTER] knob to choose an appropriate reason and then push the [ENTER]
knob.
8. The display changes as below.
5-14
121234567
CH 12034
*
ECC: OK
121234567
CH 12034
To view contents, rotate [ENTER] knob
to choose ALL VIEW and push the
ALL VIEW
[ENTER] knob..
**
**