Furuno FS-1570 Operator's Manual page 74

5 CALLING, RECEIVING
5. If you want to send a proposal, rotate the [ENTER] knob to choose RE-SEND and then
push the [ENTER] knob.
Compose message
**
CALL TYPE : INDIVIDUAL
STATION ID :
001234567
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
COM. FREQ : 12341.5 KHZ
DSC FREQ : 12M-INTL
GO TO ALL VIEW
6. Prepare an individual call and press the [CALL] key to send. If the receiving station
accepts your proposal, you can begin communications.
Manually acknowledging individual call with "ABLE"
1. When an individual call is received and the equipment is set up with manual
acknowledge and comply type "ABLE," the alarm sounds and the display looks like the
one below.
Individual request
call received.
FROM SHIP:
ROUTINE
TELEPHONE
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as shown below.
Received message
MAR-23-2002-23:00:00
INDIVIDUAL REQUEST
FROM COAST:
ROUTINE
TELEPHONE
! "
ANSWER
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. The
display shown below appears.
Compose message
**
CALL TYPE : ABLE
ACKNOWLEDGEMENT
ABLE
TO COAST :
001234567
COM. TYPE : TELEPHONE
UNABLE
COM. FREQ : NO INFO
DSC FREQ : 12M-INTL
GO TO ALL VIEW
4. Rotate the [ENTER] knob to choose ABLE and then push the [ENTER] knob. The
display changes as below. (Working frequency is automatically set as specified by other
party.)
5-12
**
121234567
CH 12034
ECC: OK
001234567
CH 12034
To view contents, rotate [ENTER] knob
to choose ALL VIEW and then push
ALL VIEW
[ENTER] knob.
**