Furuno FS-1570 Operator's Manual page 111

How to Enter File Name and Number
1. Push the [ENTER] knob to open the file name entry window.
Message file entry
*
FILE NAME
: ----------------
FILE NUMBER : ---
2. Use the numeric keys and [ENTER] knob to enter file name (max. 16 characters) and
press the [ENTER] knob. For example, enter FURUNO as the file name.
How to assign file name
[1_] key : 1→_→1
[2ABC] : 2→A→B→C→2
[3DEF] : 3→D→E→F→3
[4GHI] : 4→G→H→I→4
[5JKL] : 5→J→K→L→5
[6MNO] : 6→M→N→O→6
[7PQRS] : 7→P→Q→R→S→7
[8TUV] : 8→T→U→V→8
[9WXYZ] : 9→W→X→Y→Z→9
[0_] : 0→_→0
1. Rotate [ENTER] knob to select location.
2. Press appropriate key.
3. Push the [ENTER] knob to open the file number entry window. Key in file number in three
digits with the numeric keys and then push the [ENTER] knob. For example, press [0] [0]
[1] [ENTER] to enter file number 001.
Message file entry
*
FILE NAME
: FURUNO
000
FILE NUMBER : ---
4. Push the [ENTER] knob twice. The display shows the name and file number entered.
Message file entry
*
FURUNO
NO001 file entered
Go to next file?
YES: [ENT] key
NO: [CANCEL] key
GO TO NEXT FILE
5. Push the [ENTER] knob to continue.
FILE ENTRY
Note: The available file number is 001-799 and
900-999. Do not use "8" as the first digit
of a file number. Pressing the [8] key, when
choosing the file to send, would cause the
printer to print current screen.
FILE ENTRY
If the file name or number exists the message
"Duplicate name (number) ! Overwrite OK?" appears.
Push the [ENTER] knob to write over the name, or
press the [CANCEL] key to escape.
6 PREPARING TX CALLS
How to enter "FURUNO" as file name
1. Press the [3] key to display F.
2. Rotate [ENTER] knob to shift cursor.
3. Press the [8] key to select U.
4. Rotate [ENTER] knob to shift cursor.
6. Press the [7] key to select R.
7. Rotate [ENTER] knob to shift cursor.
8. Press the [8] key to select U.
7. Rotate [ENTER] knob to shift cursor.
8. Press the [6] key to select N.
9. Rotate [ENTER] knob to shift cursor.
10. Press the [6] key to select O.
6-3