6 PREPARING TX CALLS
Editing before sending
1. Press the [FILE/CURSOR] key at the DSC standby screen to show the send message
file list.
2. Rotate the [ENTER] knob to choose file desired and then push the [ENTER] knob.
DETAIL
DELETE
3. DETAIL is selected; push the [ENTER] knob. The message contents are shown on the
"Compose message" screen.
4. Edit the message as necessary.
5. Press the [CALL] key to send the message.
6.7 Deleting Send Message Files
1. Press the [FILE/CURSOR] key at the DSC standby screen to show the send message
file list.
2. Rotate the [ENTER] knob to choose file desired and then push the [ENTER] knob.
DETAIL
DELETE
3. Rotate the [ENTER] knob to choose DELETE and then push the [ENTER] knob.
6.8 Printing List of Send Message Files
You can print a list of send message files as follows:
1. Press the [FILE/CURSOR] key to open the Send message file list.
2. Press the [8/PRINT] key.
3. YES is selected; push the [ENTER] knob to print.
********** Send message file **********
001. FURUNO JAPAN
002. FURUNO USA
003. FURUNO UK
004. FURUNO DENMARK
005. FURUNO NORWAY
006. FURUNO SPAIN
007. FURUNO FRANCE
Note: Message not framed in actual printout.
6-10
INDIVIDUAL CALL
INDIVIDUAL CALL
PSTN CALL
GROUP CALL
INDIVIDUAL CALL
ALL SHIPS CALL
INDIVIDUAL CALL