Enlarging The Picture Size; Resize Buttons - Toshiba TLP-X10U Owner's Manual

Enlarging the picture size

Remote control
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET
L-CLICK R-CLICK
VOLUME/ADJUST
MENU ENTER EXIT
EXIT
PIP FREEZE
RESIZE
CALL MUTE
RESIZE
The icon appears in the resize mode.
You can enlarge (resize) the picture size projected.
/ / /
Notes
• Enlarged images can be frozen by pressing the FREEZE button. When frozen, images cannot be
enlarged or reduced.
• The resize mode is cancelled if any operation other than setting the freeze mode is performed.
• This projector uses electrical digital resizing, so the picture quality degrades when images are
enlarged.
• In rare cases, the picture may be disturbed while the magnification section is being moved.
• With some signals, the image cannot be enlarged.
• This function does not work in no input status (no signal is supplied from the signal source).
Press RESIZE (
RESIZE
The enlargement ratio increases each time the RESIZE (
button is pressed.
The enlargement ratio can be increased continuously by keeping the
button pressed in.
To reduce the enlargement ratio, press the RESIZE (
RESIZE
The enlargement ratio can be reduced continuously by keeping the button
pressed in.
The enlarged section is moved when the selection buttons
( / / / ) are pressed.
The section can be moved continuously by keeping the button pressed in.
Press the EXIT button to cancel the resize mode and return to the
EXIT
original size.
CONTENTS
).
36
)
) button.