Toshiba TLP-X10U Owner's Manual page 72

FULL MENU settings – Factory reset mode (continued)
Control panel
Remote control
(Main unit side)
AUTO
KEYSTONE
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET VOL/ADJ.
L-CLICK R-CLICK
VOLUME/ADJUST
ENTER
4 MENU
5
MENU ENTER EXIT
ON/STANDBY
PIP FREEZE
RESIZE
CALL MUTE
TEMP LAMP
BUSY
4
5
AUTO
SET
Notes
4
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
EXIT
5
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
INPUT
• When the "Factory reset mode" menu is executed, the adjustments and settings for all the
inputs return to the factory default settings. (It is impossible to reset them for each input
source.)
ON
FAN
Press ENTER.
ENTER
The settings are reset to the factory default settings according
to the conditions selected in step 3.
ENTER
EXIT
After the settings are finished, press EXIT.
The menu screen disappears.
EXIT
72
CONTENTS