Connecting A Computer - Toshiba TDP B1 User Manual

Connecting a Computer

1 Plug one end of the VESA computer cable into the video connector
on your computer.
2 Plug the other end of the VESA computer cable into the
nector on the projector.
Do you want to play your computer's audio on the projector?
1 Plug either end of the audio cable into the audio connector on your
computer.
2 Plug the other end of the audio cable into the
projector.
audio cable
VESA cable
Connecting the projector to a computer
con-
F 5
IGURE
connector on the
NOTE: Many laptop computers
do not automatically turn on
their external video port when a
secondary display device such
as a projector is connected.
Refer to your computer manual
for the command that activates
the external video port. Activa-
tion commands for some laptop
computers are listed in the
Appendix of this manual on
page 36.
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connec-
tor, you must use a Mac adaptor
between the computer and the
projector.
7