Using The Keypad And Remote Buttons - Toshiba TDP B1 User Manual

U s i n g t
16
h e P r o j

Using the Keypad and Remote Buttons

While the menus are displayed, the volume, source, and standby buttons
on the keypad act as menu navigation buttons. See "Using the On-
Screen Menus" on page 18 for details.
lamp LED
F 11
IGURE
Keypad and remote buttons
Lamp on/off (keypad only)
Press the
lamp on/off
indicates the state of the lamp. A green Lamp LED indicates that you
can turn the lamp on, or the lamp is currently on. An orange LED indi-
cates the software is initializing or the lamp is cooling. Do not press the
lamp on/off
Menu
Press the
menu
close the menus. When you close the menus, the projector saves any
changes you made. For more information about the on-screen menus,
see page 18.
Source (keypad only)
When you have more than one source (computer and video) connected
to the projector, select between them by pressing the
the keypad or the
e c t o r
button to turn the lamp on or off. The Lamp LED
button when the LED is orange.
button to open the on-screen menus. Press
or Computer and Video (remote only)
or
computer video
menu
source
button on the remote.
again to
button on