Connecting A Computer - Toshiba TDP-P3-US User Manual

Connecting a Computer

The projector ships with an M1-DA analog computer cable. If
your computer has a digital output, you can order the optional
M1-DA digital computer cable. See "Optional Accessories" on
page 39.
1 Plug the
into the
2 Plug the end of the M1-DA analog computer cable into
the video connector on your computer.
USB mouse
end of the M1-DA analog computer cable
connector on the projector.
audio cable
M1-DA analog computer cable
Connecting the projector to a computer
in in
F
IGURE
NOTE: Many portable computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some portable
computers are listed in the Appen-
dix of this manual on page 40 or
6
visit support.toshiba.com for more
information.
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector.
7