Controls Menu - Toshiba TDP B1 User Manual

Controls Menu

Video Standard
When Video standard is set to Auto, the projector attempts to pick the
video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or SECAM)
automatically based on the input signal it receives. (The video standard
options may vary depending on your region of the world.) If the projec-
tor is unable to detect the correct standard, the colors might not look
right or the image might appear "torn." If this happens, manually select
a standard by clicking the left or right navigation button and cycling
through the standards.
Standby Time
This option lets you select how long the lamp stays on and the blank
screen is displayed when the projector enters standby mode before the
projector turns off. Select among 1, 5, 10, and 15 minutes and 1 and 2
hours by clicking the left or right navigation button and cycling through
the options.
F 16
IGURE
Controls menu
NOTE: If you already know the
video standard used in your
geographical area, it's often
best to manually select it.
23