Connecting A Computer - Toshiba TDP-S2 User Manual

Connecting a Computer

The projector ships with an M1-DA analog computer cable and a
PR Lite computer cable. If your computer has a digital output,
you can order the optional M1-DA digital computer cable. Con-
tact your Toshiba dealer for ordering information.
1 Plug the end of the M1-DA analog computer cable
into the connector on the projector.
2 Plug the blue
into the video connector on your computer.
Computer 1
in
audio cable
USB
M1-DA analog
mouse
computer cable
end of the M1-DA analog computer cable
in
Connecting the projector to a computer
Computer 2
PR Lite
computer cable
F 7
IGURE
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 43 or visit sup-
port.toshiba.com for more infor-
mation.
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector. The supplied Mac
adapter will only work with the
1024x768 resolution. Please set
your Mac's video card accordingly.
9