Standby
When you press
standby
screen is displayed for 15 minutes. You can change the amount of time
the projector stays in standby mode; see "Standby Time" on page 23 for
details.
If you press
•
standby
normal operations immediately.
If you press
•
standby
delay before the lamp turns back on.
If you don't press
•
Volume (keypad only)
To increase the volume, press
press
volume -
.
Volume adjustments are saved for each source you have connected.
, the display and audio turn off and a blank
again within 15 minutes, the projector returns to
again after 15 minutes, there is about a 60 second
again, the lamp turns off after 15 minutes.
standby
volume +
To decrease the volume,
.
17