Connecting A Video Player - Toshiba TDP B1 User Manual

Connecting a Video Player

1 If your video player uses a round, one-prong composite video con-
nector, you'll need only the audio cable, audio adapter, and compos-
ite video cable that shipped with the projector.
If your video player uses a round, four-prong S-video connector,
•
you'll need an S-video cable in addition to the audio cable and
audio adapter.
2 Plug the composite video cable's yellow connector into the "video-
out" connector on your video player (Figure 6). This connector may
be labeled "To Monitor."
If you're using an S-video cable, connect it to the "S-video out"
•
connector on the video player (Figure 7).
3 Plug the other yellow connector into the composite video connector
on the projector.
If you're using S-video, plug the other end of the cable into the
•
"S-video" connector
audio
adapter
composite video cable
audio cable
Connecting the projector to a video player using the standard video cable (with
composite video connector) and the audio cable and adapter
on the projector (Figure 7).
F 6
IGURE
9