zoom ring
focus ring
Usage Guidelines
Do not look directly into the projection lens when the lamp is turned
•
on. The bright light may harm your eyes.
Do not block the grills on the projector. Restricting the air flow can
•
cause it to overheat and turn off. If this happens, you must wait a
minute before attempting to turn it back on.
Handle the projector as you would any product with glass compo-
•
nents. Be especially careful not to drop it.
Avoid leaving the projector in direct sunlight or extreme cold for
•
extended periods of time. If this happens, allow it to reach room tem-
perature before use.
Transport the projector in a vendor-approved hard or soft case.
•
speaker
keypad
Kensington Lock
connector panel
power
cord
connector
F
2
IGURE
Side view of projector
3