Advertisement
Quick Links
Your safety and the safety of others is very important.
In order to help you make informed decisions about safety, we have provided installation
instructions and other information.
These instructions alert you to potential hazards that could hurt you or others.
Please do a job safety analysis (JSA) before each task to identify potential hazards for
your situation and remove/protect against them.
You must use your own good judgment, and take your time.
Read and understand all safety precautions and instructions before installing this product.
THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION
AND USE RESTS WITH THE OWNER.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY
OR EQUIPMENT DAMAGE.
Failure to observe these instructions could lead to severe injury or death.
Always remove jewelry and wear eye protection.
Always use extreme caution when jacking up a vehicle for work. Set emergency
brake and use tire blocks. Locate and use the vehicle manufacturers designated
lifting points. Use jack stands.
Always use appropriate and adequate care in lifting components into place.
Always insure components will remain secure during installation and operation.
Always wear safety glasses when installing this kit. A drilling operation will
cause flying metal chips. Flying chips can cause serious eye injury.
Always use extreme caution when drilling on a vehicle. Thoroughly inspect the
area to be drilled (on both sides of material) prior to drilling, and relocate any
objects that may be damaged.
Always use extreme caution when cutting and trimming during fitting.
Always tighten all nuts and bolts securely per installation instructions.
Always route electrical cables carefully. Avoid moving parts, components that
become hot and rough or sharp edges.
Always insulate and protect all exposed wiring and electrical terminals.
Always perform regular inspections and maintenance on mounts and
related hardware.
Installation Instructions
SAFETY
Injury hazard
Page 1 of 7
Winch Mount
Product Number: N3250, N3270
Application: 2015 Ford F150
Advertisement
Related Manuals for Fab Fours N3250
Summary of Contents for Fab Fours N3250
- Page 1 Installation Instructions Winch Mount Product Number: N3250, N3270 Application: 2015 Ford F150 SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information.
- Page 2 Your winch mount is designed in 3-D from digitized data, CNC laser cut, fabricated, and powder coated…all in the U.S.A. Enjoy the fit and finish of a quality Ford F150 Winch Mount from Fab Fours Inc. Page 2 of 7...
-
Page 3: Tools Required
III. Kit Contents FAB FOURS PART DESCRIPTION NUMBER Winch Mount N3250 Tow Hook 61366 N3250 Hardware Kit 50031-HW N3250 Ford F-150 Instruction Manual N3250-IM Passenger side mounting bracket 20910 Driver side mounting bracket 20911 IV. Included Hardware Page 3 of 7... - Page 4 Installation Instructions Winch Mount Product Number: N3250, N3270 Application: 2015 Ford F150 Removal of OEM tow hooks and Plastic Note: Save all OEM parts until installation is complete! A. Using a flathead screwdriver, carefully remove center plastic piece, indicated by oval in the center of the OE bumper.
- Page 5 Installation Instructions Winch Mount Product Number: N3250, N3270 Application: 2015 Ford F150 of the frame (ref. fig. 2c). If front OEM bumper contains sonar (ref. fig. 2b), remove four bolts with 11 mm. If your bumper includes a sonar device, remove it now using a 12 point, 4mm socket.
- Page 6 E. Slide out both nut strips from the frame channel when done. F. Reinstall bumper without the tow hooks and plastic tow hook shrouds. VI. Installation of Fab Fours Winch Mount A. Review the provided exploded parts view. B. Loosely install the provided bumper mounting brackets to the OEM tow hook locations using factory fasteners.
-
Page 7: Maintenance & Care
Installation Instructions Winch Mount Product Number: N3250, N3270 Application: 2015 Ford F150 VII. Maintenance/Care Periodically check and tighten all fasteners Stripped, fractured, or bent bolts or nuts need to be replaced After washing of the vehicle make sure to fully dry all surfaces VIII.