Fujitsu GW1500 Getting Started Manual page 9

GW1500 Getting Started Guide
This symbol indicates the possibility of minor or moderate personal injury.
Caution
They also indicate improper usage may damage the device or instruments connected
to the device.
Cautions
Do not touch the device for a long time
(one minute or longer) when the power
is on.
Doing so may cause low-temperature
Do Not
burns.
Do not place objects on the device or
climb on top of the device to work.
Doing so may damage the device and
cause a failure, or it may injure the
Do Not
worker.
Install this device indoors.
Installing it outdoors may cause device
failures.
Do not install the device in an extremely
hot or cold location, or in a location with
severe temperature changes.
Doing so may cause device failures.
Keep the device within the specified
Do Not
operating temperature range.
Do not install the device in an unstable
location, such as a wobbly table or
slanted location.
Also, do not use in a location subject to
strong shocks or vibrations.
Doing so may drop components and
Do Not
cause injuries, damage, or device
failures.
When moving the device, be sure to
stop the power supply by unplugging the
DC cord or AC adapter from the outlet.
Not doing so may cause failures.
Perform wiring correctly.
If the wiring is not installed properly,
communications will not perform
correctly, and it may lead to a device
failure.
Do not stack the device.
Doing so may drop components and
cause injuries, damage, or device
failures.
Do Not
Do not use the device near equipment
that creates a strong magnetic field,
such as a microwave oven.
Doing so may cause device failures.
Do Not
Do not install the device in a location
where there is direct sunlight, near a
heater, or in a location with large
amounts of humidity or dust.
Doing so may cause electrical shock or a
Do Not
fire.
Do not use the device in an environment
with corrosive gas, such as in a chemical
spray or a place touched by chemicals.
Doing so may cause damage and device
Do Not
failures.
Ensure the area necessary for handling
cables.
Even when using the device next to
others, provide a service area for each
device as necessary.
Not doing so may cause damage or
failure in the cables.
If there is any dust attached to the metal
section of the AC adapter or the
surrounding area, wipe it off thoroughly
with a dry cloth.
If you continue to use the device as it is
may cause fire.
Insert the AC adapter plug firmly into the
outlet.
If the plug is not inserted firmly enough, it
may cause electrical shock, smoke, or
fire.
9 Safety Precautions