Fujitsu GW1500 Getting Started Manual page 26

GW1500 Getting Started Guide
Using the Magnet Sheet
Mount the device on a wall as a single unit using a magnet sheet.
Use the GW2HWMG01 magnet sheet (option).
When using the magnet sheet, do not attach the rubber feet to the device.
[Installation Procedure]
1. Place the base surface of the device to the magnet sheet.
Place the device facing its base surface to the side of the magnet sheet that does not
have the Fujitsu logo engraved.
2. Install the device with the magnet sheet to a metal wall surface.
Install the device to the wall with any of the following orientations.
The upper side of the figure faces the ceiling, and the bottom side of the figure faces the
floor.
Magnet Sheet
Metal Wall Surface
Magnet Sheet
Magnet Sheet
26
Magnet Sheet
Chapter 2 Device Installation