Fujitsu GW1500 Getting Started Manual page 12

GW1500 Getting Started Guide
For details about disposing of this product, refer to "FUJITSU Managed Infrastructure
Service FENICS II M2M-GW Getting Started Guide (Japanese version)".
High Frequency Current Rating
This product complies with the high frequency current rating JIS C 61000-3-2.
Cautions for Handling
Be careful of the following items when handling this device.
- Manage and keep the configuration definition information for this device yourself after
completing settings. If a malfunction occurs and our company performs the recovery,
we will use the configuration definition information you have managed and kept. If you
cannot provide this configuration definition information, the recovery may take some
time. Back up this configuration definition information as appropriate and always
manage and keep the latest version.
- This device is embedded with a circuit to protect against lightning and static electricity.
Therefore, if lightning or static electricity enters the device, you may not be able to use
some functions. In this case, turn off the device and on again to restore it to normal. If
you cannot use some functions even after turning the power off and back on, or the
power does not turn on, it is possible that the protective circuit was not able to fully
protect the device and the device was damaged . In such a case, contact one of our
company's technicians or technicians approved by our company.
- Never turn off the power or reset the device while the basic software is being updated.
The device will not be able to start up if the power is turned off or the device is reset
during an update.
- In the event this device fails and must be replaced with a repaired product, the basic
software version of the repaired product may be different from the basic software
version at the time of the failure. For a smooth recovery, we recommend making a
note of the current basic software version.
You can confirm the basic software version using the show version command.
- Before exporting the device or optional AC adapter to Europe, you must attach to the
device or optional AC adapter the importer's label (for details, refer to
Base Surface" on page
or its agent.
17) that contains information on the legal entity of the importer
12
"1.1.5 Device
Safety Precautions