Modern Fan Co Cirrus Flush Installation Instructions

Cirrus Flush Fan- Installation instructions
Should you have any questions or difficulty installing your new fan,
please contact Modern Fan Co. customer service immediately.
Note: Power supply must be turned off prior to any contact with electrical wires. It is
recommended that a licensed electrician be hired to install your ceiling fan.

(1) Remove and identify contents of carton.

blades
(2) Using the existing screws from your junction
box, or the machine screws from the hardware
package, secure the ceiling plate to ceiling
junction box. The electrical wire must be
accessible through the hole in the center of the
ceiling plate.
(3) Secure suspension cable loop around the hook inside
the top of the fan body.
With fan suspended by cable, make wire connections with
wire nuts included in hardware package as described in the
control installation instructions. If using the optional #003,
#004 or #005 control, the receiving unit should be placed
inside the top of the fan and connected at this time.
Cirrus Flush
THE MODERN FAN COMPANY
Customer Service
M-F 8am - 4pm (PST)
(ph) 888.588.3267
www.modernfan.com
fan body optional control
bottom dome
ceiling
plate
balancing
kit
hardware
package
hook