Modern Fan Co Velo Flush Installation Instructions

Table of Contents

Download this manual

Velo Flush Fan- Installation instructions

Should you have any questions or difficulty installing your new fan,

please contact Modern Fan Co. customer service immediately.

Note: Power supply must be turned off prior to any contact with electrical

wires. It is recommended that a licensed electrician be hired to install your

ceiling fan.

(1) Remove and identify contents of carton.

blades

bottom cap

balancing

kit

or existing screws in junction box, securely attach

mounting plate to ceiling junction box.

(3) Using blade screws from hardware package,

secure blades to rotor arms.

Velo Flush

THE MODERN FAN COMPANY

Customer Service

M-F 8am - 4pm (PST)

(ph) 888.588.3267

www.modernfan.com

mounting plate

fan body

hardware

optional

package

control

Table of Contents

Do you have a question about the Velo Flush and is the answer not in the manual?

Page 1 Velo Flush Fan- Installation instructions Should you have any questions or difficulty installing your new fan, please contact Modern Fan Co. customer service immediately. Note: Power supply must be turned off prior to any contact with electrical wires. It is recommended that a licensed electrician be hired to install your ceiling fan.
Page 2 (4) Suspend fan from mounting plate using security cable loop and washer hook. security cable washer hook (5) With fan safely suspended by cable, make wire connections with wire nuts included in hardware package as described in the Control Installation Instructions.
Page 3 (10) Install optional wall control as described in the control installation instructions (unless using handheld remote control only). (11) Your fan is reversible for summer and winter operation. The reverse switch is located on the side of the fan body. When reading the REVERSE label, the LEFT position is for summer and the RIGHT position is for winter.