Advertisement
Advertisement
Table of Contents
Related Manuals for Wyrestorm EX-SW-0201-4K
Summary of Contents for Wyrestorm EX-SW-0201-4K
- Page 1 PDF provided by Conference Room AV WyreStorm EX-SW-0201-4K HDMI, VGA 4K HDBaseT HDCP 2.2 Auto Switcher Tx/Rx, 328'...
-
Page 2: Installation
EX-SW-0201-4K A full-featured 5-Play HDBaseT extender set with the added feature of a VGA/HDMI auto-switching transmitter. WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process. Additional Information... -
Page 3: Front Panel (Tx/Rx)
IR TX: Connect to the supplied IR emitter. IR RX/TX IR RX: Connect to the supplied IR receiver. Wiring. Copyright © 2015 WyreStorm Technologies | wyrestorm.com North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343 2 of 4 EX-SW-0201-4K Quickstart Guide | 151125... -
Page 4: Supported Video Resolutions
Mode Enabled 1 2 3 1 2 3 1 2 3 1 2 3 Copyright © 2015 WyreStorm Technologies | wyrestorm.com North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343 3 of 4 EX-SW-0201-4K Quickstart Guide | 151125 support@wyrestorm.com... -
Page 5: Specifications
• Verify that the IR emitter is located near the IR receiver on the device. Input: 100~240V AC 50/50Hz Power Supply Troubleshooting Tips: Output: 12V DC 2A • WyreStorm recommends using a cable tester or connecting the cable Max Power Consumption 26.5W to other devices to verify functionality. 48V 15.4W •...
Need help?
Do you have a question about the EX-SW-0201-4K and is the answer not in the manual?
Questions and answers