Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm Express exp-EX-HDBT-50
Summary of Contents for Wyrestorm Express exp-EX-HDBT-50
- Page 1 WyreStorm Express™ HDBaseT 4K Extender with Two-way IR Control to 25m/82ft (1080p to 50m/164ft) Instruction Manual RoHS Thank you for choosing this WyreStorm Express product. Please read these instructions carefully before installing to avoid complications later.
-
Page 2: Safety Precautions
• 5v mains supply included but receivers may be powered through the MX0404-QI Panel Description Features USB port of the display using Wyrestorm USB to 5v power adaptor) i. Transmitter • Quick and easy installation – set up in seconds straight out of ii. Receiver the box. -
Page 3: Package Contents
5. Unplug apparatus from power supply during • 1 x WyreStorm EXP-EX-HDBT-50 Transmitter lightening storms or when unused for long periods of • 1 x WyreStorm EXP-EX-HDBT-50 Receiver time. -
Page 4: Panel Description - Receiver
Panel Description Panel Description - Transmitter - Receiver EDID management – see Transmitter EDID Settings Distance SETTING - see Receiver distance Settings for details (section 9) for details (section 9) IR RX Input – 3.5mm IR Receiver placed at display IR RX Input –... -
Page 5: Typical Application
Optional: For control system integration a above is a factor in your installation, transmission WyreStorm IR Integration Cable (CAB-IR-LINK) range may be affected – take care to avoid where should be used to connect the IR RX port of the possible. -
Page 6: Troubleshooting
EDID & Distance Setting Transmitter EDID set to 1080i 2ch Stereo - 2D Receiver Distribution of HD signals through devices requires Reserved for future use - no function mutual communication or ‘handshake’ between source Transmitter and display. If there is any disparity between the two, EDID set to 1080p 5.1 - 2D successful transmission becomes problematic. - Page 7 8) Check LED indication on Receiver for confirmed and configuring the matrix, we are confident solutions can be found by working through the operation. Are LEDs on and/or behaving properly (static following troubleshooting checklist before seeking or blinking - see Panel Description for details on LED indication).
- Page 8 7.1 at 60Hz, try lowering to 50Hz) Note: Occasionally with some sources, the device Combined 4K / HD distributions - a WyreStorm EXP-SCL- settings allow the specification of audio output DAC-4K scaler may be required between receiver and through a TV or an HDMI port.
- Page 9 Recommended conditions denotes no electrical interference, straight cable runs with no bends or kinks 6) Are WyreStorm emitters and receivers being used? and no patch panels or wall outlets. If some of the above The use of third party products/magic eyes may not be are factors in your installation then signal strength and compatible.
-
Page 10: Maintenance
WyreStorm equipment are legal and comply with HDCP Products without PoH or PoE technology require local regulations. 12v or 5v DC power at both ends for both units to operate. Check your instructions carefully for details. -
Page 11: Warranty Limits And Exclusions
Limited warranty period: All WyreStorm products are covered by a 3 year PARTS and LABOUR warranty. During this period there will be no charge for unit repair, replacement of unit components or... - Page 12 Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 WyreStorm Offices US +1 866 677 0053 UK: +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm reserves the right to change product specification, appearance or dimensions at any time. wyrestorm.com...
Need help?
Do you have a question about the Express exp-EX-HDBT-50 and is the answer not in the manual?
Questions and answers