Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm EXP-EX-COAX-50
Summary of Contents for Wyrestorm EXP-EX-COAX-50
- Page 1 50m Coaxial Extender with 2-way IR & EDID Management Instruction Manual RoHS Thank you for choosing this WyreStorm Express product. Please read these instructions carefully before installing to avoid complications later. 0115...
-
Page 2: Safety Precautions
MX0404-QI and multi channel audio transmissions over distances Maintenance USB port of the display using Wyrestorm USB to 5v power adaptor) up to 50m (164ft) • Quick and easy installation – set up in seconds straight out of Product Service •... -
Page 3: Package Contents
Package Contents 2. Do not place this unit in a confined space such as enclosed shelving, cabinets or bookshelves. • 1 x EXP-EX-COAX-50 transmitter 3. Ensure the unit is adequately ventilated. • 1 x EXP-EX-COAX-50 receiver • 1 x Printed quickstart installation guide* 4. -
Page 4: Panel Description - Receiver
Panel Description Panel Description - Transmitter - Receiver EDID – see Transmitter EDID for details Setting – see Receiver Settings for details (section 9) (section 9) ISP Port – Mini USB port for firmware updates ISP Port – Mini USB port for firmware updates COAX Output COAX Input Power indication –... -
Page 5: Typical Application
Typical Application TRANSMITTER. Avoid excessive bending of the HDMI cable and ensure connectors are inserted firmly in all ports. SOURCE DEVICE ATTENTION Do Not Hotswap! - Please insert and extract cables carefully with the power SWITCHED OFF. Connecting and disconnecting while the unit is powered can result in damage to circuitry. - Page 6 EDID auto copy Automatically copies EDID from the DISPLAY connected to the RECEIVER to the HDMI The EXP-EX-COAX-50 extender comes equipped with INPUT port of the TRANSMITTER to encourage EDID management on the transmitter to encourage EDID compatibility between SOURCE and communication between INPUT and OUTPUT devices DISPLAY.
-
Page 7: Troubleshooting
Note: If you are approaching the limits of the transmission speed rated HDMI cables and check operation. If in capabilities, you will need to use an additional WyreStorm doubt, replace them. Always take care inserting and Extender set for the signal to transmit effectively. - Page 8 AV receiver and the speaker configuration used needed for successful 5) Are you using WyreStorm emitters and receivers? audio replication? If you are outputting 5.1, make sure all The use of third party products/magic eyes may not be devices connected are also outputting 5.1.
-
Page 9: Maintenance
• The unit has been dropped or capabilities, then the signal can be boosted by way of the cabinet damaged. another Coax, or any other WyreStorm HDMI extender product (such as HDBaseT). Our transmission signals 2. Servicing Personnel: Do not attempt to service... -
Page 10: Mail-In-Service
Limited warranty period: equipment, travel to and from service location, loss of or All WyreStorm Express products are covered by a 1 year damage to media, images, data or other recorded/stored PARTS and labor warranty. During this period there will be content. -
Page 11: Installation Notes
Installation Notes... - Page 12 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 For technical support contact: support@wyrestorm.com WyreStorm reserves the right to change product specifications, dimensions or appearance at any time. wyrestorm.com...
Need help?
Do you have a question about the EXP-EX-COAX-50 and is the answer not in the manual?
Questions and answers