Table of Contents
Advertisement
OptiView
TM
Series II
Getting Started Guide
•
Do not operate the product around explosive gas,
vapor or dust.
•
No serviceable parts.
•
This product contains a Class I laser (OptiView
II Integrated Network Analyzer Pro and Pro Gigabit
models); looking into the laser port may cause eye
damage.
•
Do not connect a telephone line to this product.
•
If this product is used in a manner not specified by the
manufacturer, the protection provided by the product
may be impaired.
To avoid possible damage to the analyzer and to the
equipment under test, follow these guidelines.
•
Use the proper terminals and cable for all connections.
Cleaning the Analyzer
To prevent moisture from entering the analyzer, clean the front panel touch display
with a moist cloth only. Do not spray water directly on the front panel touch
display. Wipe the case with a damp cloth. Do not use organic solvents, acid, or
alkali solutions.
Has This Instrument Been Damaged in Shipping?
ATTENTION!
In case of damage, call the carrier at once for inspection, and request an inspection
report. ALWAYS NOTIFY THE CARRIER FIRST! Please do not write the
factory until you have notified the carrier, since this will delay the claim.
If this precaution is not taken, we cannot assist you in recovering the amount of
claim against the carrier.
When the carrier's inspection report is obtained, you may return the instrument and
copy of the inspection report to the factory immediately.
2
W
Cautions
Series
TM
Advertisement
Table of Contents
