Table of Contents
Advertisement
15 - TROUBLESHOOTING
The Troubleshooting Guide lists some possible machine problems, causes and corrections. Also see Manual 2
"Troubleshooting" pages for taping head problems.
Note – Adjustment of the machine or taping heads are described in "Adjustments".
15.1 Troubleshooting Guide
Problem
Drive belts do not convey boxes
Drive belts do not turn
Drive belts break
Squeaking noise as boxes pass
through machine
Tape not centered on box seam
800af-I-NA
Cause
Worn drive belts
Top taping head does not apply
enough pressure
Taping head applying spring
holder missing
Taping head applying spring set
too high
Worn or missing friction rings
Drive belt tension too low
Electrical disconnect
Motor not turning
Worn belt
Dry compression bearings
Dry column bearings
Centering guides not centered
Box fl aps not of equal length
47
Correction
Replace drive belts
Adjust the box height adjustment
with the crank
Replace spring holder
Reduce spring pressure
Replace friction rings
Adjust belt tension
Check power and electrical plug
Evaluate problem and correct
Replace belt
Lubricate compression bearings
Lubricate column bearings
Adjust centering guides
Check box specifi cations
(continued)
2010 December
Advertisement
Table of Contents
