ITech IT6500 Series User Manual page 22

CONFIG MENU
Load
Ext-Ctrl
CONFIG
Limit
Online
OCP
LIST
Func.
DIN40839
Configuration Menu
Load Setup
Enables the dummy load.
Automatically
disabled.
Off
The function of Automatically return meter
after 5s enabled.
On
Ext-Ctrl mode and related parameter setting
Ext-Ctrl Setup
10v-M
10V/5V monitoring mode options
5v-M
10V/10K-P
5V/5K-P 10V/10K or 5V/5K setting mode selection
V-P
Voltage(resistance)setting mode selection
R-P
Off
Disable this function
On
Voltage Range Set the range of voltage.
Minimum voltage setting
Vmin= 1.000V
Maximum voltage setting
Vmax= 80.000V
Online
connection mode
Online Setup
Parallel
Parallel/Series connection
Series select.
Master
Slave Act as master/slave, press up/down key to select.
When as master, it will display "Mount..." (need
Mount...
to set the count of slave) ; when as slave, it will
display "Addr..."(need to set the address of
Addr... instrument, range is 0 to 31)
Off
On Disable/Enable this function
Set the status of OCP
OCP Setup
Disable over current protection function
Off
Enable over current protection function
On
LIST MENU
List Menu
Off
Quit list mode
Recall
RECALL LIST
Recall List File= 1
EditList Edit list operation
Edit sequence operation
EditSeq
Evaluation of automobile starting waveform
DIN40839
12V
Select the 12V or 24V system
24V
Enable/Disable DIN40839 function
Off
Copyright ©ITECH Electronic Co., Ltd.
Function and Features
Return Meter function
, press up/down key to
Recall the list file
Select the list file
number
15