ITech IT6500 Series User Manual page 2

Notices
© Itech Electronic, Co., Ltd. 2018
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval
translation into a foreign language) without
prior permission and written consent from
Itech Electronic, Co., Ltd. as governed by
international copyright laws.
Manual Part Number
IT6500-402006
Revision
Second Edition: July 09, 2018
Itech Electronic, Co., Ltd.
Trademarks
Pentium is U.S. registered trademarks of
Intel Corporation.
Microsoft, Visual Studio, Windows and MS
Windows are registered trademarks of
Microsoft Corporation in the United States
and/or other countries and regions.
Warranty
The materials contained
document are provided "as is", and is
or
subject to change, without prior notice,
in future editions. Further, to the
maximum extent
applicable laws, ITECH disclaims all
warrants, either express or implied,
with regard to this manual and any
information contained
including but not limited to the implied
warranties of merchantability and
fitness for a particular
ITECH shall not be held liable for
errors or for incidental or indirect
damages in connection with the
furnishing, use or application of this
document or of any information
contained herein. Should ITECH and
the user enter into a separate written
agreement with
covering the materials in this document
that conflict with these terms, the
warranty terms in
agreement shall prevail.
Technology Licenses
The hardware and/or software described
herein are furnished under a license and
may be used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
Restricted permissions
government. Permissions for software and
technical data which are authorized to the
U.S. Government only include those for
custom provision to end users. ITECH
follows FAR 12.211 (technical data),
12.212 (computer
252.227-7015 (technical data--commercial
products) for national defense and DFARS
227.7202-3 (permissions for commercial
computer software or computer software
documents) while providing the customized
business licenses of software and technical
data.
Safety Notices
in this
A CAUTION sign denotes a
permitted by
hazard. It calls attention to an
operating procedure or practice
that, if not correctly performed or
adhered to, could result in damage
herein,
to the product or loss of important
data. Do not proceed beyond a
CAUTION sign until the indicated
purpose.
conditions are fully understood and
met.
A WARNING sign denotes a
warranty terms
hazard.
operating procedure or practice
that, if not correctly performed or
the separate
adhered to, could result in personal
injury or death. Do not proceed
beyond a WARNING sign until the
indicated
understood and met.
of the U.S.
A NOTE sign denotes important
hint. It calls attention to tips or
supplementary information that is
essential for users to refer to.
software). DFARS
It calls attention to an
conditions are fully
NOTE