JRC JHS-800S Instruction Manual page 61

■
Making a radiotelephone call
1 1 . .
1 .
Select CH16 or other agreed channel.
2 2 . .
2 .
Lift the handset from the cradle.
3 3 . .
3 .
Press the PTT key, and make a call as described below.
Say the calling station name ... Repeat 3 times.

"this is"

Say own ship name ... Repeat 3 times.

"over"

4 4 . .
4 .
Release the PTT key to listen.
5 5 . .
5 .
When answered and agree on a working channel, change to that channel.
6 6 . .
6 .
After checking that no station uses the working channel , begin conversation.
- When transmitting from own station, always press the PTT key while talking.
Note
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
■
Receiving a call on CH16
1 1 . .
1 .
Lift the handset from the cradle.
2 2 . .
2 .
Press the PTT key, and respond to the call as described below.
Say the caller station name.

"this is"

Say own ship name.

3 3 . .
3 .
Propose a channel other than 16 as described below.
"channel"

Working channel number

4 4 . .
4 .
Allow the caller station to transmit.
"over"

5 5 . .
5 .
Release the PTT key, wait a moment, and then switch to the proposed working
channel.
6 6 . .
6 .
After checking that no station uses the working channel, begin conversation.
- When transmitting from own station, always press the PTT key while talking.
Note
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
■
■
Operation
4-9