JRC JHS-800S Instruction Manual page 155

■
Removing the waterproof cover
1 1 . .
1 .
Press the side of the waterproof cover
(arrow part) inward.
The paper cover will open.
2 2 . .
2 .
Lift the lower end of the waterproof cover
forward and remove it.
.
■
Turning the power on / off
1 1 . .
1 .
Pull the release lever toward you.
Press and hold the power button.
■
Loading the printer paper
1 1 . .
1 .
Pull the release lever toward you.
The paper cover will open.
2 2 . .
2 .
Insert the paper as shown at right .
Position the paper such that the edge extends
outside the printer, and press the both sides of
the paper cover to close it. W hen the paper
cover is closed, paper feed and cutting of the
leading edge of the paper are done
automatically.
■
■
■
Options Operation
Print surface
10-5