JRC JHS-800S Instruction Manual page 102

Operation
(2) Receiving a call from another controller
■ ■
Procedure
1 1 . .
1 .
If received an intercom call, the screen at right is
displayed and the ringing is started.
If not answer within 30 seconds, the screen returns to the
previous screen. Also, if you touch the [CANCEL] button,
the screen returns to the previous screen. Touch the
[ACCEPT] button to enter the CONNECTED state.
2 2 . .
2 .
When answering to the call, lift the handset and start
the communication.
➢ Press PTT key to talk.
➢ To finish the intercom, replace the handset on hook.
➢ Touching the [FINISH] button at this point returns you to
the screen in step 1.
- The
Note
talking, because the called controller
(recipient) is in monitor mode.
- While using the intercom function between two
of controllers, if the other controllers are
connected, those screens display as shown at
right.
4-50
mark remains displayed even while