Menu Shutdown Timer Setting; Setting The Handset - JRC JHS-800S Instruction Manual

Marine vhf radiotelephone
Hide thumbs Also See for JHS-800S:
Table of Contents

Advertisement

5.3.5

Menu shutdown timer setting

Do the following settings for closing the menu automatically when the device is left alone with the
menu displayed.
Procedure
1 1
. .
1
.
In the main menu, touch the [SETUP] → [DISP SET]
→ [MENU SHTDN] buttons.
2 2
. .
2
.
Use the [+]/[-] buttons or the [Edit] button to make
changes.
The range for settings using the [+]/[ -] buttons is OFF or 01
- 60 (minutes). Select OFF when you do no t want the menu
to automatically close. W hen using the [Edit] button, input
00. In this case, OFF is displayed after setting.
3 3
. .
3
.
Finally, push the [ ✓ ] button to confirm.
5.3.6

Setting the handset

You can disable handset detection via the hook switch so as not to set to CH16 when returning the
handset to the cradle (HOOK SW ITCH). (As a factory default setting, the hook switch is set to
"Valid".) You can also set the feedback (PHONE SIDE TONE).
Procedure
1 1
. .
1
.
In the main menu, touch the [SETUP] → [DISP SET]
→ [HANDSET] buttons.
2 2
. .
2
.
Display the page you want to set with the [<]/[>]
buttons, and then use the [+]/[-] buttons to select it.
➢ The setting items are as follows.
• [1/2] HOOK SET
HOOK SW ITCH: VALID/INVALID *1,2
OFF-HOOK:
• [2/2] PHONE SIDE TONE *3
FRONT:
REAR:
ON/OFF
ON/OFF
ON/OFF
Settings & Registrations
5-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents