Handset Connection Box (Nqe-1845/1846/1847B) - JRC JHS-800S Instruction Manual

Options Operation

10.2 Handset connection box (NQE-1845/1846/1847B)

There are three types of handset connection boxes: a waterproof flush mount type f or a
wing console (NQE-1845), a waterproof wing installation type (NQE -1846) and an indoor
flush mount type (NQE-1847B).
Close the water-resistant cap of the waterproof type handset box after use.
Rain and sea breeze could cause connector malfunction.
handset above deck.
1
2
Waterproofed
flush mount type
for wing console
(NQE-1845)
■ ■
Procedure
1 1 . .
1 .
In the case of the waterproof type, remove the water -resistant cap.
2 2 . .
2 .
Connect the handset (NQW -980) to the connector.
3 3 . .
3 .
Turn ON the switch to start communications.
The access right is obtained by turning on this switch.
(This switch is equivalent to hook switch of the handset.)
Note
• Always turn off the switch when not in use.
• Even if the switch is turned on, while another controller with higher priority is in use,
the access right will not be obtained.
10-2
CAUTION
3
1
2
Waterproofed
wing installation type
(NQE-1846)
Also do not leave the
3
1. Connector
2. Switch
3. Waterproof cap
Indoor flush mount type
(NQE-1847B)
1
2