Honeywell CVL4022ASVAV1 Engineering Manual page 85

Nv/field
fan_output
in_alarm
nvoVelSenPress
nvoWindow
aka
nvoEnergyHoldOff
Table 22. Network Variable - Outputs (Continued)
Net Data Type
If a fan is configured as one speed, This value is 100 percent, when the fan is
running and is zero when the fan is not running. If a modulating fan is configured,
reports the fan speed in percentage.
0 – 100%
0 - Means there is no application alarm.
Not 0 - Means there is an application alarm
SNVT The calibrated value of the cooling airflow pressure sensor. The sensor value minus
press_f the offset value.
≤
-0.0494
This network output allows the hard wired window sensor to be used by other
SNVT
switch nodes on the network.
The valid states are described below:
State
SW_OFF
SW_ON
SW_NUL
Description
≤
range 1.5833 inWc
Value
0 Window closed
100% Window open
0 Window sensor not configured
85
Meaning
31-00083—02