Page 1
AURIX™ TC3X4 TQFP device (0.4mm pitch). The manual provide information for different hardware types. There exist different hardware with Through Hole socket (TriBoard TC3X4T TH) and soldered devices (TriBoard TC3X4T). The schematic is identically for the all boards if not other mentioned in chapter schematic. The placing on the boards is the same, all components are on the same location.
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Table of Contents Table of Contents About this document ..............Preface-1 Table of Contents .
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Introduction Introduction We congratulate you on your purchase of the TriCore Evaluation Board. This kit is a versatile tool, providing quick access to the capabilities of TriCore's powerful architecture.
Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Features Features Summary of Features – Infineon’s TC3X4 (TC364, TC334, TC324) AURIX™ 2G Controller in TQFP-144 Package (0.4mm pitch) – FlexRay™ Transceivers – High Speed CAN Transceivers (CAN-FD capable) – USB to UART bridge –...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Features – 4-pin Dip switch Zero Ohm Bridges Zero Ohm resistors give the flexibility to configure the systems functionality. Block Diagram XTAL CAN0 TxCAN03 RxCAN03 Transceiver CAN1 TxCAN01...
Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information TriBoard Information Soldered board TriBoard TC3X4T V1.0 is the soldered board and will be available only with usable devices. Please see also chapter Usable devices. Socketed board TriBoard TC3X4T TH V1.0 is the socketed board and will be available in two assembly options: –...
• None Power Supply All needed voltages are generated via Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV and via the microcontroller itself (+1,25V). The supply device is available as two different devices: TLF35584QVVS1 -> +5V standby voltage, +5V TriCore supply (V_UC) TLF35584QVVS2 ->...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information 3.6.1 Serial Connection to PC After the first connection of USB to a PC the needed driver will be installed automatically. During this there will be created a new COM port on PC. This COM port can be used to communicate with the board via ASCLIN0 of the device.
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information Per default the miniWiggler is connected to the DAP. If resistors R214, R215 and R216 assembled (default) then the standard DAP is connected to miniWiggler. If all this resistors are not assembled then the miniWiggler can’t be used.
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information 3.13 Other peripherals For all other peripherals there are no special plugs on the board. The peripheral signals are available on the different connectors. See “Connector Pin Assignment” on Page 6-1 3.14...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information 3.16.4 High speed with DAP For use the DAP connection with 160 MHz you need to remove 3 resistors to have a very short connection between device and connector.
Page 18
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Information Because the device don’t have a VDDSB pin the 1,25V standby supply pin of the connector is not connected on this board. User Manual 3-11 V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 TriBoard Configuration TriBoard Configuration HW Boot Configuration Figure 4-1 HW Configuration DIP-Switches The picture above shows the definition of the boot HW configuration switch. The meaning of the switches will be...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Signal (on board used) Description Signal (on board used) Description For more information about the signals please see the user manual/datasheet for TC3X4 and/or the schematics of the board.
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Connector Pin Assignment Connector Pin Assignment The TriBoard will be shipped with four male (plug) connectors on top layer and four female (socket) connectors on bottom layer. The default connectors are 80-pol. Board to Board connectors from Samtec: http://www.samtec.com...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Schematic and Layout Known problems 7.1.1 Known problems on TriBoard TC3X4T TH V1.0 No problems known. 7.1.2 Known problems on TriBoard TC3X4T V1.0 No problems known.
Page 35
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-1 Schematic - Project User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 36
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-2 Schematic - Clock, Config, Debug, Ports and ADC User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 37
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-3 Schematic - On Board Peripherals User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 38
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-4 Schematic - miniWiggler JDS and Debug connectors User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 39
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-5 Schematic - Power Supply User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 40
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-6 Schematic - Connectors (Plug) User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 41
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-7 Schematic - Connectors (Socket) User Manual V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Layout with Dimensioning The following dimensions should be used for development of extension boards. Figure 7-10 Dimensioning (mm) User Manual 7-11 V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0...
Page 45
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Schematic and Layout Figure 7-11 Dimensioning (mil) The dimensioning is valid for all TriBoards. User Manual 7-12 V1.1 TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 2019-09...
Page 46
TriBoard Manual TC3X4T Hardware: TriBoard TC3X4T TH V1.0 and TriBoard TC3X4T V1.0 Revision History Page or Item Subjects (major changes since previous revision) V1.1, 2019-09 chapter 3.2 Add missing information about C518, improve description V1.0, 2019-08 First version User Manual RevisionHistory-1 V1.1...
Page 47
Infineon Technologies, Infineon Technologies in customer's applications. Document reference Infineon Technologies’ products may not be used in The data contained in this document is exclusively Doc_Number any applications where a failure of the product or any intended for technically trained staff.
Need help?
Do you have a question about the TriBoard TC3X4T and is the answer not in the manual?
Questions and answers