Install the Remote Switch
NOTE: Use zip-tie (Z) to install the remote switch to the
hose or pole spray applicator (follow the illustrations
below). The remote switch will fit on hoses/applicators
sized 0.75 in. up to 1.25 in.
3A6393D
Pump Control Settings
Pump
Control
Description
Setting
The motor will run continuously at the
speed determined by the flow adjustment
ON
knob (H).
The motor will not run. There is still power
OFF
to the unit.
The "Remote Control" setting allows the
user to control ON/OFF functionality of the
pump through the remote toggle switch.
When the remote toggle switch is installed
Remote
and the pump control settings are set to
Control
"Remote Control", the toggle switch can
be used to turn the pump ON and OFF
(see descriptions above).
Component Identification
9