Burner Parts And Pan Supports - Fisher & Paykel OR90SDBGFX3 Care And Cleaning

If you choose to use a commercial stainless steel cleaner, please read the label to make
sure it does not contain chlorine compounds as these are corrosive and may damage the
appearance of your cooker.
Cleaning the Gas Cooktop
Contact your local authorised gas Service Agent to perform a thorough check on all gas components on the gas cooker.
Maintenance
Period
Daily
• Clean gas cooktop as per following instructions.
Monthly
• Remove all burner parts, and clean using a non-abrasive detergent. Rinse in cold water, dry
• Clean the ignitor and probe carefully, using a toothbrush and methylated spirits.
Every 3-4
• Contact your local authorised gas Service Agent to perform a thorough check on all gas
years

Burner Parts and Pan Supports

• You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly
before they become burnt on. Do not wash these parts in a dishwasher.
• After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
• It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure
to do so can cause serious problems.
To avoid damage to the electronic ignition, do not try to light a burner without all burner parts in
place.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX...
thoroughly, and replace.
components on the gas cooker.
Description
Updated: Thu, 20 Feb 2020 06:37:43 GMT
Powered by
2