Qn Local Flow Control Selection; Vn Protocol Result Code - Toshiba V.90 User Manual

32
AT Commands
AT command formats
\N5 V.42. MNP or Buffer (same as \N3).
\N7 V.42. MNP or Buffer (same as \N3).
Result Codes:
OK
ERROR Otherwise

Qn Local flow control selection

\Q0 Disable flow control.
\Q1 XON/XOFF software flow control.
\Q3 RTS/CTS to DTE (default).
Result Codes:
OK
ERROR Otherwise

\Vn Protocol result code

\V0 Disable protocol result code appended to DCE speed.
\V1 Enable protocol result code appended to DCE speed
Result Codes:
OK
ERROR Otherwise
n = 0, 1, 2, 3,4,5,7
n = 0, 1, 3
(default).
n = 0, 1