Receiving A Call; Terminating A Call - Toshiba V.90 User Manual

You can enter as many commas as you need. The following
example will result in a six-second pause:
ATDT 9
NOTE: If you are using a PBX connection that does not wait
for a dial tone, add the X0, X1 or X3 to the AT command line.
For example:
Actual usage will vary according to the host system, so
please check with the system manager.

Receiving a call

To set the number of rings before the internal modem
automatically answers the phone, set the S0 register as follows:
* and press
ATS0=
The asterisk * indicates the number of rings.
See "S-Register values" on page 40

Terminating a call

The methods for terminating a call depend on the status of the
connection.
❖
If the internal modem is dialing or has not yet gone online,
you can terminate a call by pressing any key.
❖
If the terminal is online, enter the escape code (
ATH
❖
If the remote party disconnects, the call will be automatically
cut off.
❖
If the power to the computer is cut off, the call is terminated.
, ******* and press
ATX3DP 9
.
Enter
and press .
Enter
Using the Internal Modem
Basic operation
.
Enter
, ******* and press
for more details.
.
Enter
), then type:
+++
9