Table of Contents
Advertisement
30
AT Commands
AT command formats
DTMF Dial Speed
Escape GuardTime
Data Calling Tone
Press any key to continue;
Stored phone numbers
&Z0=
&Z1=
&Z2=
&Z3=
OK
&W Store current configuration
Saves the current (active) configuration (profile), including S-
Registers.
The current configuration comprises a list of storable parameters
illustrated in the &V command. These settings are restored to the
active configuration upon receiving a Zn command or at power-
up. Refer to the &V command.
&W
Result Codes:
OK
ERROR Otherwise
Option
No Carrier Disc
Line Rate
Stores the current configuration.
n = 0.
Selection
AT Command
2000 msec.
95 msec.
1000 msec.
Disabled
33600
to quit.
Esc
S10
S11
S12
S35
S37
Advertisement
Table of Contents
