Table of Contents
Advertisement
Standard commands
Error control
Data compression
Serial port access
Ring indicator
Standby/Hibernate
The internal modem is compatible with the industry
®
standard Hayes
settings.
This feature assures accurate data transmission even
over telephone lines subject to noise interference. The
internal modem uses Microcom Networking
®
Protocol
4 (MNP
Compression can greatly increase data throughput.
The internal modem has MNP5 and V.42bis data
compression protocols.
The internal modem frees your computer's serial port
for connection of a serial mouse, serial printer or other
serial device.
The computer can be powered on automatically when
the modem answers a call. This feature is available
only when the computer is in Resume/Standby mode.
Refer to your computer's documentation for details on
ring indicator power on.
When the computer is set to Standby or Hibernate, the
modem settings automatically resume when you turn
on the power. Refer to your computer's
documentation for details on Standby/Hibernate
modes.
AT commands and S-Register
®
4) and V.42 error correction.
xiv
Advertisement
Table of Contents
