Table of Contents
Advertisement
50
S-Registers
AT command set result codes
Result Code
CONNECT 45333 EC*
CONNECT 46666 EC*
CONNECT 49333 EC*
CONNECT 50666 EC*
CONNECT 53333 EC*
CONNECT 54666 EC*
* EC appears only when the Extended Result Codes configuration option is enabled. EC is replaced
by one of the following symbols, depending upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol
Command Set Result Codes Table (Continued)
Numeric
109
Connection at 45333 bps (V.90
mode)
110
Connection at 46666 bps (V.90
mode)
111
Connection at 49333 bps (V.90
mode)
112
Connection at 50666 bps (V.90
mode)
113
Connection at 53333 bps (V.90
mode)
114
Connection at 54666 bps (V.90
mode)
Description
Advertisement
Table of Contents
