Pc Health Status; Miscellaneous Control - JETWAY J7F3 Series User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
Shutdown Temperature
Show PC Healthy in Post
Vcore
VDIMM
+3.3V
+5V
+12V
3VSB
VBat
5VSB
CPU Temperature
System Temperature
CPUFAN
SFAN1
SFAN2
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Miscellaneous Control.
Auto Detect PCI Clock
Spread Spectrum
CPU Clock
VDIMM Select
Flash Part Write Protect
CPU DRAM Frequency Ratio
DRAM Frequency
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU Clock
This item allows you to select the CPU ratio.
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Disabled
Enabled
1.07V
1.90V
3.26V
5.00V
11.96V
3.33V
3.28V
4.91V
48/118F
35/95F
6849RPM
0RPM
0RPM
F6:Optimized Defaults F7:Standard Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Enabled
Disabled
133
1.90V(Default)
Disabled
SPD
200MHZ
F6:Optimized Defaults F7:Standard Defaults
Menu Level >
Menu Level >
34
Item Help
F1:General Help
Item Help
F1:General Help