Table of Contents
Advertisement
2-4 Install Memory
The motherboards provide
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 1.0GB DDR2 SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DDR1)
Total
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 240-Pin DDR 333 / DDR 266 DDR SDRAM module looks like.
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
WARNING! For the DDR SDRAM CLOCK is set at 166MHz, use only DDR333-compliant DDR
Modules. When this motherboard operate at 133MHz, most system will not even
boot if non-compliant modules are used because of the strict timing issues, if your
SDR Modules are not DDR333-compliant, set the DDR SDRAM clock to 133MHz
to ensure system stability.
one
184-pin DUAL INLINE MEMORY MODULES (DIMM)
184-Pin DIMM
DDR 333/ DDR 266
DDR SDRAM Module
System Memory (Max. 1.0GB)
PCS
X1
Figure 2-4
9
Total Memory
64MB∼1.0GB
1
64MB∼1.0GB
Advertisement
Table of Contents
